drm logo
(647) 558-8505
Get in touch

Floor Sawing Services in Toronto / GTA + Ontario – Clean Cuts for Concrete & Asphalt

Experienced Operators | Commercial & Industrial Projects | Free Estimates

Best For:

Floor sawing (also known as slab sawing) is the process of cutting horizontal surfaces such as concrete slabs, asphalt roads, driveways, factory floors, and parking lots. Using powerful walk-behind saws equipped with diamond blades, we deliver clean, straight cuts with minimal disruption. 1. Scope intake (drawings/photos + constraints: access, ventilation, uptime window) 2. Hazard check (scan/locates as required; mark-out) 3. Containment & protection (dust/slurry control, barriers, housekeeping plan) 4. Cut execution (electric/diesel selection; vibration/noise controls)  5. Slurry handling & cleanup (no “gray film” left behind) 6. Removal optional (if included)  7. Closeout (photos, quantities, sign-off)

01

Removing damaged concrete or asphalt

02

Creating expansion joints

03

Cutting trenches for plumbing

Detailed Information

We offer fast and efficient floor sawing for both indoor and outdoor projects. Whether you need a driveway removed or a warehouse floor modified, we have got you covered.

Toronto, North York, Scarborough, Mississauga, Etobicoke, Brampton, Vaughan, Richmond Hill, and nearby cities.

Cuts up to 30 inches depending on conditions, Concrete and asphalt cutting, Wet cutting for dust control, Quick mobilization and job site clean-up. Deeper cuts possible with specific setup — confirmed during scope review.
GPR floor scanning before sawing

No Blind Cuts — We Scan First

Before floor sawing we run GPR concrete scanning to locate power, conduit, rebar, and hidden lines. We mark the slab, adjust the route if needed, then cut with a verified plan. Optional written summary + photos available for owners, GCs, and inspectors.

gpr-callout-wide

Our Impressive History of Projects

services works 0
services works 1
services works 2
services works 3
services works 4
services works 5

Floor Sawing FAQs

Everything you need to know before you start your project.

Floor sawing is commonly used to cut through concrete slabs, asphalt, and other flat surfaces for trenches, expansion joints, and removal work.

We can cut up to 30 inches deep depending on the equipment and site conditions.

Yes, we offer both indoor and outdoor floor sawing using electric or diesel-powered saws depending on ventilation and space.

Our saws are designed for precise, controlled cutting with minimal vibration to avoid damage to surrounding areas.

Concrete removal is available upon request and can be included as part of the service package.

Most floor sawing jobs are completed within a few hours, depending on size and complexity.
Get Started

Request a Controlled Saw-Cut Plan Free Quote

Send more information (if you have): address, concrete thickness, Indoor/outdoor, drawings/photos

Get Your Free Quote

Contact Information

7:00 AM – 8:00 PM Monday to Friday

(647) 558-8505

Email Us

[email protected]

Service Area

GTA/Ontario daily. Canada-wide for wire sawing.

Why DRM Cutting?

  • Licensed & Insured
  • 15+ Years Experience
  • Modern Equipment
  • 24/7 Emergency Service
  • No-Blind-Cuts Policy